基于倾斜摄影的三维模型单体化方法研究-计算机工程与应用.PDFVIP

178 2018 ，54（3 ） Computer Engineering and Applications 计算机工程与应用 基于倾斜摄影的三维模型单体化方法研究 用 王 勇，郝晓燕，李 颖 应 WANG Yong, HAO Xiaoyan, LI Ying 与 太原理工大学 计算机科学与技术学院，太原 030024 程 College of Computer Science and Technology, Taiyuan University of Technology, Taiyuan 030024, China g 工 r o WANG Yong, HAO Xiaoyan, LI Ying. Study of method for achieving 3D model to be single based on oblique photo- . j grammetry image. Computer Engineering and Applications, 2018, 54 （3 ）：178-183. 机 a 算 e Abstract ：The splitting property of triangle patches are used to solve the problem of achieving the separate 3D building c . model to be single based on oblique photogrammetry image. Firstly, this paper draws a cutting polygon to determine the 计 model boundary. Then bounding box is used to make the intersection detection to obtain the triangle patches which need w to be cut. And the intersection points of triangles are found which may intersect with cutting polygon. Each of intersecting w cases is detailed introduced and analyzed. All these intersection should be cut according to their actual conditions respec- w tively. The cut triangular patches should be reconstructed. Through reconstructing the texture and levels of detail can achieve the separate 3D building model to be single. The experimental results show that this method can effectively achieve 3D model to be single. Key words ：triangular patch; intersection detection; separation; cut; achieving 3D model