变电培训仿真系统中仪表控件的应用研究-水利水电工程专业论文.docxVIP

华 中 科 技 大 学 硕 士 学 位 论 文 I 摘 要 变电培训仿真系统(Substation Operator Training Simulator，简称 SOTS)是运用计算 机软硬件技术模拟电站运行的仿真系统。SOTS 通过为变电运行人员提供一个与实际 生产现场高度近似的仿真环境而使运行人员得到身临其境的实况演练。本文主要研究 和实现一套适合于变电站培训仿真系统的仪表控件，以改善人机界面的外观，并保持 学员的操作界面接近实际的现场操作环境。 具体内容包括控件开发和控件调试。控件开发主要是仿真系统的应用控件，生成 系统所需要的控件界面。控件调试主要包括各控件的状态调试和逻辑输出调试，确保 控件能正常工作并达到系统要求。首先对整个变电培训仿真系统进行了介绍，包括系 统的硬件配置、系统的软件结构和功能以及系统的功能模块设计。然后对整个屏柜界 面系统及屏柜上仪表控件的外观和功能进行了设计，明确了各控件的设计重点及要完 成的功能。最后阐述了控件的实现机制及类的结构设计，并显示最终的仿真结果。 经实验，本系统实现了对现场屏柜的外观和功能仿真，能在变电培训中为学员提 供较真实的操作环境。 关键词：变电站 培训仿真 仪表 控件 II Abstract The Substation Operator Training Simulator (SOTS) is to make use of software and hardware techniques to simulate how the electricity station works. The SOTS could provide a nearly real environment compared with the actual scene, so that the personnel could get useful exercises by using this system. This paper mainly researches a suit of gauge control suitable for SOTS in order to improve the external appearance of the man-machine interface and to keep the operation interface near the actual environment. The concrete contents includes the gauge control development and adjustment. The former is mainly about simulating the controls and interfaces of the system, while the latter is mainly focusing on the state adjustment and logical output of the controls. Firstly, the paper introduces the whole system including hardware station ,software structure and function of the SOTS. Secondly, the paper makes a design of the interface and gauge controls, and then clarify the point of each part. Finally, the paper states the class design and implement, and show the final result of simulation. The system realize the simulation of external appearance and function of the actual screen ,which can provide a vivid interface to the operator between their training. Keywords: SOTS Simulator Gauge Control  PAGE 4 目 录  HYPERLINK \l _bookmark0 摘 要 I  HYPERLINK \l _bookmark1 ABSTRACT II  HYPERLINK \l _bookmark2 1 绪 论 1  HYPERLINK \l _bookmark3 1.1 研究背景 1