基于Arduino单片机路灯控制设计.PDFVIP

基于Arduino 单片机的路灯控制设计 摘要 资源是国家发展的动力。我国照明路灯由于控制方面的问题，每年都会浪费 大量的电力资源。尽管现在led 路灯已经取代了大量传统的路灯，大大节约了电 力资源，但不合理的管理依旧造成了资源的浪费，因此系统化管理与路灯控制依 旧是led 路灯不可或缺的重要部分。鉴于此，本人设计了一种基于Arduino 单片 机的路灯控制设计方案，大大节约了电力资源。 本设计以Arduino 单片机为核心组成控制模块，采用lcd1602 显示当前路灯 状态与时间，通过按键调节当前时间，用时间来控制路灯，在半夜则间隔点亮路 灯，以此达到节能的效果。并通过光敏电阻监测光线的明暗，遇到突发天气则会 自动点亮路灯。 该设计基于稳定的硬件设计和稳定C 语言实现了基本设计。通过半夜的间隔 点亮路灯，达到节能的效果。 关键词：Arduino LCD1602 自动控制 时钟 节能 1 Abstract Resource is the driving force for the development of the country. Lighting lamps in China waste a lot of power resources every year due to the control problems. Although a large number of traditional street lamps have been replaced by led lights now and greatly save electricity, the unreasonable management still caused a waste of resources. So the systematic management and street lamp control is still an important part of led street lamp. In view of this, I designed a kind of street lamp control design scheme based on the Arduino microcontroller, greatly save the electricity. This design with the Arduino microcontroller as the core of control module ,adopt lcd1602 to display the current state of street lamps and time, adjust the current time through the buttons and use time to control the street lamp. Light lamp will turn off half in the middle of the night, saving energy effect. And meeting the bad weather will be automatically lighted lamp through the photosensitive resistance monitoring the light and shade. The design is based on the stability of the hardware design and stability of C language to achieve the basic design. Light lamp will turn off half in the middle of the night, saving energy effect. Key words: Arduino; LCD1602; automatic control; clock; energy-saving 2