机械外文翻译材料的机械加工性.docVIP

The machinability of material The machinability of a material usually defined in terms of four factors: （1）Surface finish and integrity of the machined part; （2）Tool life obtained; （3）Force and power requirements; （4）Chip control. Thus, good machinability good surface finish and integrity, long tool life, and low force and power requirements. As for chip control, long and thin (stringy) cured chips, if not broken up, can severely interfere with the cutting operation by becoming entangled in the cutting zone. Because of the complex nature of cutting operations, it is difficult to establish r