压铸模浇口设计分析--毕业论文设计.docVIP

PAGE 安徽工贸职业技术学院 毕业论文（设计） 论文题目： 压铸模浇口设计分析 姓 名： 专 业： 计算机辅助设计与制造 指导教师： 提交日期： 2012年3月17日  摘 要 压铸浇口设计是压铸生产技术中极为重要的组成部分。在压铸生产中，浇口技术对压铸件的质量、压铸操作的效率，模 具寿命、压铸件的切边和清理，压铸合金的重熔率，压铸机功率的效能等方面有着重大的影响。 压铸填充过程是由填充条件所决定的。而填充条件又取决于压铸工艺对压铸机，压铸模、压铸合金三个基础部分进行结合和调整的结果，在这个结合和调整的过程中，浇口系统是极为关键的环节。 由于填充条件的复杂性，使填充过程成为复杂的问题，并且造成理论上和实践上总有一定的距离。可以认为，在理论上，每种压铸件都有一个理想的最佳填充条件，因而也有一个相应的最佳浇口系统。而在实践中，要达到理想的填充条件却是十分困难的，往往只能寻找一个接近理想的填充条件。当掌握了浇口技术后，便可找到一个与接近理想的填充条件相应的浇口系统。 关键词：压铸，填充条件，浇口技术 ABSTRACT The design of die-casting sprue is the most important part of die-castingproduction technology.In die-casting producion,sprue technology has a great influences on the quality of casting,casting production efficiency,the life of mold,resection and clearing for casting,remelting rate of casting alloys,die casting machine’s power performance and so on. The filling of casting depands on filling conditions.And filling conditions is decided by casting process on the three parts of die-casting machine,die-casting mold and die-casting alloys of the result of integration and adjust.In the process of integration and adjust,gate system is the most important part. Because of complexity of filling conditions,so filling process become complex problem and caused by certain distance of theoretical and practical.We can think,in theory there is a perfect filling conditions of every kind of castings,so there is a ideal gate system with it corresponding.But in practice it is quite difficult to beyound ideal filling condition.Often are looking for near ideal filling conditions.When you masted gate technology,you can find one gate system with near ideal filling conditions. Keywords:Die-casting， filling conditions,gate technology 目录 TOC \o 2-3 \h \z \t 标题 1,1 HYPERLINK \l _Toc231934893 摘 要 3