毕业设计（论文）-基于MCGS嵌入式组态软件和S7-200的水压机试验监控系统.docVIP

长春工业大学学士学位论文 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I 摘 要 装备制造业的进步和能源工业的快速发展,为钢管工业带来了繁荣。与此同时,钢管产品的质量和使用的安全可靠性也随之成为了人们关注的焦点。以往的耐压试验都是由操作人员直接观测被测管件来进行质量检测，因此，往往会使检测结果不够精确或产生偏差。所以，实现密封管件质量检测的高效化、精确化具有重要的意义。 水压试验机是制管生产线上的压力检测设备。其工作行程大，在全行程中都能对工件施加最大工作力，没有巨大的冲击和噪声，劳动条件较好，环境污染较小。 本文结合嵌入式组态软件MCGS和S7-200 PLC设计与实现了水压机试验监控系统，功能上实现了屏幕截图及存储。系统中，上位机采用组态软件MCGS建立人机界面，下位机采用西门子S7-200 PLC进行现场数据采集及转换。本系统监控界面友好，运行稳定可靠，检验效率得到提高。 关键词：PLC 触摸屏 水压机 屏幕截图及存储 Application of PLC and Touch-screen in hydraulic press test monitoringcontroling system Abstract The progress of the equipment manufacturing industry and the rapid development of energy industry,brought prosperity for steel pipe industry.At the same time,the quality of steel pipe products and use of safety and reliability has become the focus of attention.Pressure test are all in the past by the operating personnel direct observations of pipe being tested for quality testing.As a result,tend to make test results inaccurate or biased.So,to achieve efficient,high-precision seal fitting quality testing has important significance. Hydrostatic testing machine is pipe pressure test equipment in production line.Its large working stroke,in the whole trip can exert maximum working force on the workpiece,no great shock and noise,better working conditions and less environmental pollution. Based on configuration software MCGS and S7-200 PLC is designed and implemented,hydraulic press test monitoring system functions on the screen capture and storage.System,the PC configuration software MCGS is adopted to establish man-machine interface,the hypogyny machine adopts Siemens S7-200 PLC to field data acquisition and conversion.Monitor this system friendly interface,running stable and reliable,and the test efficiency was improved. Keywords :PLC Touch Screen Hydraulic Press Screen capture and storage 目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc5889 第一章 绪