毕业论文设计《即恒量泵毕业设计论文》.docVIP

PAGE II 题目：恒量泵设计 外文题目：THE DESIGN OF CONSTANT PUMP 本论文在毕业设计中获得的成绩为优秀；如果要购买（价格为50元）会另外附赠全部9张CAXA图纸、外文文献及翻译、开题报告、实习报告等；下载完成后请用QQ（562484476）或邮箱（qkjh1986@163.com）联系我。 其中文章中显示黑色部分请在下载后将其选定，去掉底纹颜色即可。 毕业设计（论文）共 90 页（其中：外文文献及译文27页） 图纸共9张 完成日期 2011年6月 答辩日期 2011年6月 摘要 在广泛应用的各种液压设备中，液压泵是关键性的元件，它们的性能和寿命在很大程度上决定着整个液压系统的工作能力，随着技术的进步，液压泵的性能越来越完善，在各种工业设备、行走机构以及船舶和飞机上都得到了广泛应用。因此对于叶片泵相关知识的学习和认识十分必要，特别是对于从事液压相关方面工作的人更显得尤为重要。 本文以现今已广泛应用的叶片泵为基础，对定量叶片泵即双作用叶片泵进行设计。在设计过程中采用了一些有关叶片泵的新技术和新观点，并用于叶片泵的设计。设计中对双作用叶片泵的叶片倾角进行了探讨，并对比两种观点的优劣，选择了现今已越来越得到广泛承认的叶片倾角等于零的观点。在定子过渡曲线的设计上也没有采用传统的等加速-等减速曲线或阿基米德螺旋线，而是结合现今数控机床普及的事实,选用高次曲线作为定子过渡曲线的设计基础。 设计中还主要参考了YB1型系列叶片泵的相关产品的结构和技术参数，并以其为基础，重新设计了叶片泵的定子过渡曲线和叶片倾角等结构参数，使叶片泵的部分或整体性能有所改善。 关键词：双作用叶片泵；定子过渡曲线；叶片倾角 Abstract Widely used in various hydraulic equipment, hydraulic pump is a critical component, their performance and life to a large extent determine the capacity of the hydraulic system of work, with the development of the technological progress, hydraulic pump’s performance is more and more perfect, pump in various industrial equipment, walks the organization and the ship and aircraft have been widely applied. Therefore vane pump for knowledge and necessary, especially for the work in hydraulic related more appear particularly important. This article has been widely applied in modern-day vane pump as the foundation, based on quantitative vane pump is double-acting vane pump design. In the design process of vane pump adopt some new technology and new ideas, and used in the design of vane pump. Design of double-acting vane pump of the blade angle is discussed, and the comparison of two kinds of views chooses now has more and more widely recognized blade angle equal to zero point of view. In the design of the stator transition curve and there are no adopts traditional Constant acceleration-such as deceleration curve or Archimedes spiral curve, but a combination of the fact that the current popularity of CNC machine tools, selection of high-order curve is