《口字型盒盖塑件模具设计》毕业学术论文.docVIP

大学本科生毕业设计（论文） PAGE 摘 要 本次毕业设计的课题为异形盒盖的注射成型模具设计，主要从塑件材料特性、成型性能及塑件的形状、型腔结构等多角度详细分析了塑件注塑加工工艺性。因需批量生产，且零件体积不大、结构简单，故采用“一模二件”的生产方式。再初步选择注塑机的型号和规格，分析塑件结构及生产方式宜采用双分型结构，对浇注系统、成型零部件、导向及定位机构、脱模机构、冷却系统、模架各部件零件都进行了相关的计算和选择。最后，在参照塑件的体积、重量等参数后对注塑机的相关主要参数进行校核，以判断所选的注塑机能否满足注塑要求。 关键词：模具设计；一模二件；双分型面；注塑机； Abstract This graduation projects topic for the plate-type products injection molding mold design, mainly from modelled the materials behavior, the formation performance and models multiple perspectives multianalyses and so on shape, die space structure to model the injection molding processing technology capability. Because needs the volume production, and the components volume not big, the structure is simple, therefore uses “one mold two” production method. Chooses injection molding machines model and the specification initially again, the analysis models a structure and the production method uses the duplex structure suitably, to the gating system, the formation spare part, the guidance and the detent mechanism, the mold emptier, the cooling system, the pould frame various parts components has carried on the related computation and the choice. Finally, after the reference models parameters and so on volume, weight carries on the examination to injection molding machines related main parameter, whether judges the injection molding machine which elects to satisfy the injection Key word：mold design; Mold two; Duplex profile; Injection molding machine; 大学本科生毕业设计（论文） 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc325849841 摘 要 PAGEREF _Toc325849841 \h 错误！未定义书签。 HYPERLINK \l _Toc325849842 Abstract PAGEREF _Toc325849842 \h 错误！未定义书签。 HYPERLINK \l _Toc325849843 引 言 PAGEREF _Toc325849843 \h 错误！未定义书签。 HYPERLINK \l _Toc325849844 1.1我国塑料模具工业的发展现状 PAGEREF _Toc325849844 \h 错误！未定义书签。 HYPERLINK \l _Toc325849845 1.2 国际塑料模具工业的发展现状 PAGEREF _Toc325849845 \h 错误！未定义书签。 HYPERLINK \l _Toc325849846 1.2.1网络的 CAD／CAE／CAM一体化系统结构初见端倪 PAGEREF _Toc325849846 \h 错误！未定义书签。 HYPERLINK \l _Toc32584984