毕业论文设计《1.25t四支点电动叉车倾斜机构与液压系统设计》.docVIP

l 1.25t四支点电动叉车 倾斜机构与液压系统设计 摘要 本课题主要是介绍1.25t四支点电动叉车倾斜机构与液压系统设计。 通过设计与校核叉车的稳定性、牵引性、制动性、机动性等，汲取小组意见确定了一个合理的方案。 于此同时，本文重点设计液压回路：由开式油箱供油，双齿轮泵作为动力元件，油缸作为执行元件，液压控制阀作为控制元件。 倾斜机构：通过铰接在外门架上的倾斜油缸活塞杆的伸缩使门架前倾或后倾，完成取货与卸货。设计内容包括倾斜油缸受力分析计算缸径、行程、作用时间以及缸壁、缸体、缸底厚度等；计算校核活塞杆强度与稳定性。。 在此基础上完成了电动叉车液压系统与倾斜机构设计以及油路的布置。 关键词：四支点电动叉车 液压系统 倾斜机构 1.25t four-point electric forklift tilting mechanism and hydraulics design。 Abstract This paper primarily present 1.25t four-point electric forklift tilting mechanism and hydraulics design。 Though designing and checking forklift’s stability, traction gender, retard gender, maneuverability and so on. Following the advices of the group and identifying a reasonable option. On the same time ,this paper emphasis on designing hydraulic circuit ：by open type tank oil servicing, double geared pump as power component，oil cylinder as actuator，hydraulic control valve as control component 。 Tilting mechanism：through the medium of swing joint incline the piston rod of oil cylinder to pitch or retroversion , and to achieve parking or discharging goods . Design content include: incline oil cylinder stress analytical ,calculation of the cylinder diameter, calculation of the journey of the piston rod, how long the operation the of oil cylinder ,and casing the thickness of wall, cylinder body, cylinder bottom .Figure check piston rod intensity and stability up as well. On the basis of upper, finishing electric forklift’s hydraulics , tilting mechanism design ,and oil way arrangement plan as well 。 Key words: forklift tilting mechanism hydraulics 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc199472459 第一章 前言 PAGEREF _Toc199472459 \h 3 HYPERLINK \l _Toc199472460 1.1 叉车背景 PAGEREF _Toc199472460 \h 3 HYPERLINK \l _Toc199472461 1.2 叉车发展简况 PAGEREF _Toc199472461 \h 4 HYPERLINK \l _Toc199472462 1.3 倾斜机构简介 PAGEREF _Toc199472462 \h 5 HYPERLINK \l _Toc199472463 1.4 液压系统简介 PAGEREF _Toc199472463 \h 6 HYPERLINK \l _Toc199472464 第二章 设计方案论证 PAGERE