毕业论文设计《基于MATLAB_GUI_的线性动态电路分析论文》.docVIP

PAGE II PAGE I 届本科毕业论文（设计） 论文（设计）题目 基于MATLAB-GUI的 线 性 动 态 电 路 分 析 学生姓名： 所在院系： 所学专业 ：导师姓名： 完成时间： 摘 要 在电路分析中,对线性动态电路的分析方法一般是经典法和拉普拉斯变换法。不过对于较高阶的动态电路,用这些方法就会比较繁琐。而本文设计了一种新的方法伴随网络法。这种方法是把动态电路的过渡过程时间t0→T划分成若干时间间隔Δt，把动态元件电感L和电容C用相应的离散模型来取代，经过代换后的电路称为原电路的伴随网络。因而对该时间间隔内相应伴随网络的分析可视为稳态电路分析。不过这种方法需要多次重复计算,若由人来计算就会相当的复杂。所以我们利用MATLAB软件来进行编程，把计算工作交给计算机。这样就可以方便快捷地算出结果。为了使软件的界面更加友好，我们利用MATLAB自带的GUI工具做了一个图形用户界面。用户只需要按照界面的要求进行元件参数和支路编号的输入，运行后即可在屏幕上显示GUI界面下的输出电压波形和电流波形。 关键词：伴随网络法，图形用户界面，离散模型 Abstract Generally, the method of the linear dynamic circuit analysis is the Classic and Laplace transform method in circuit analysis. But these methods will be complex to the high-level linear dynamic circuit. In this article we design a new methodaccompanying network method. This method divided the time (t0→T) of transitional process of dynamic circuit into a number of intervals Δt, The dynamic component inductance L and capacitance C with the corresponding discrete model to replace, after substitution of the circuit , the original circuit is called accompanying network. So the analysis of accompanying network could be deemed as steady-state analysis. However, the times of calculation are so many. It will be too complex to calculate it by people. Therefore, we use MATLAB to program. By doing this, it will be convenient to obtain the results. At the same time, in order to get a more friendly interface, I also use the tools (GUI) of MATLAB made a graphical user interface. The user only needs to input the parameter of the components and the number of branches according to the requirement of the interface. After the running, it could output the voltage and current waveforms on the GUI interface. Key words：accompanying network , graphic user interface, discrete model 目 录 TOC \o 1-3 \u 1绪论 PAGEREF _Toc230973948 \h 1 2 线性动态电路分析的常用方法 PAGEREF _Toc230973949 \h 2 2.1 经典法 PAGEREF _Toc230973950 \h 2 2.2 拉普拉斯变换法 PAGEREF _Toc230973951 \h 2 3 电路分析中常用的仿真软件 PAGEREF _Toc2309739