毕业论文设计《xxx发电厂电气一次及变压器、母线保护设计》.docVIP

毕业设计（论文） 题 目 xxxxxxxx发电厂电气一次 及变压器、母线保护设计 专 业 电气工程及其自动化（电力） 班 级 电力082 学 生 指导教师 2012 年 摘 要 本次毕业设计为xx第二发电厂电气一次及变压器、母线保护设计。内容包括：电气主接线方案的拟定、比较和选择；短路电流的计算；主要电气设备和导体的选择； 在本次设计中,首先,对xx第二发电厂的原始资料进行分析,了解发电厂概况,从而拟定初步的主接线方案, 经过技术、经济综合比较，选择出一个最优方案作为本次设计的最终方案。并用该方案进行短路电流计算，根据短路电流计算结果选择电气一次设备并对其进行校验。然后进行配电装置设计。最后对变压器和母线进行保护设计并画出各保护的原理接线图和展开图。 关键词：发电厂，电气一次设计，短路电流，电力系统，继电保护，电气设备 The primary electrical design，the transformer and the bus bar protection design of Baoji second power plant ABSTRACT This design is forrimary electrical parts ，the transformer and the bus bar protection design of Baoji second power plant , including the design ,comparison and selection of the main electrical connection, the calculation of the short-circuit current, the selection and Calibration of the main electrical equipments and the conductor, the design of the distribution apparatus and the design of the transformer and the bus bar protection. Among them, the design of the main electrical connection is the core. It suggests the situation of the connection among generator, transformer, lines of various voltage levels，various electrical equipments. It also affects the safe, economical, stable and flexible operation of power plant, transformer substation. In this design, firstly, the scheme of the main electrical connection is studied out after the analysis of the original data and the acquaintance of power station. Second, passing through the technological and economic analysis, the best method is selected. At the same time, the short-circuit current is calculated by using it and primary electric equipment is selected and validated according to the former result. Then, the anti-thunder and grounding device is designed. Last, the transformer and the bus bar protection are designed and the schematic and wiring diagrams is designed. Key words: Power plant, Short- circuit, electric power system, relay protection, el