基于多新息最小二乘法的同步发电机一次性抛载试验-更多文档分类.PDF

第 37 卷 第 2 期 电 网 技 术 Vol. 37 No. 2 2013 年 2 月 Power System Technology Feb. 2013 文章编号：1000-3673 （2013 ）02-0378-07 中图分类号：TM 733 文献标志码：A 学科代码：470·4024 基于多新息最小二乘法的 同步发电机一次性抛载试验参数辨识 寇攀高，周建中，肖剑，肖汉 （华中科技大学水电与数字化工程学院，湖北省 武汉市 430074 ） Multi-Innovation Least Square Algorithm-Based Parameter Identification for Synchronous Generator by Once-Only Load Rejection Test KOU Pangao, ZHOU Jianzhong, XIAO Jian, XIAO Han (College of Hydroelectric Digitization Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei Province, China) ABSTRACT: In allusion to the deficiencies in load rejection 础上通过分析参数可辨识性和引入多新息最小二乘辨识算 tests for d- and q-axis of synchronous generator, a parameter 法，解决了同步发电机物理参数辨识问题。算例结果验证了 identification method for synchronous generators by once-only 该方法的有效性。 load rejection test under arbitrary operating conditions is 关键词：同步发电机；参数辨识；抛载试验；多新息 proposed. By means of analyzing dynamic process during load rejection test for synchronous generator, d- and q-axis transfer 0 引言 function models during once-only load rejection test under arbitrary operating conditions are built. Considering the 同步发电机作为电力系统的重要设备，其模型 measurability of the input/output of transfer functions, the 的精确与否不仅直接决定着电力系统稳定性分析 differential equations are turned into integral equations by 的可靠性，而且密切关系到电力系统稳定器、励磁 integral transformation, so the transfer function models of 控制器等电力系统控制器的设计。同步发电机参数 synchronous generator during load rejection test under arbitrary 辨识研究不仅受到工业界的重视[1-4]，而且受到研究