英文版本：管道颜色和字体色标.doc

Equipment and Facilities Listed below in Table 1 are colors corresponding to equipment and facilities for visual management (stainless steel, galvanized steel, plastic, and other non-corroding materials do not need to be color coded except as required for visual clarification – special application methods may be needed): Table 1 Equipment and Facilities ICI Devoe Coatings Paint Color (use OSHA Colors in High Gloss) Color Coding Standard (Based on OSHA, NIOSH, ANSI, World Class Visual Factories Color Coding Systems. Internal color coding may vary from plant to plant, however, this standard should be maintained wherever possible) Color Chip Pure White Color Number will vary depending upon system used – for High Performance Systems use DC9500 DTM Gloss Pure White Main machinery frame (exception would be stainless steel and any other part where it would be impractical). Safety Orange DC9200 DTM Safety Orange (OSHA, NIOSH Safety Orange) Moving machine parts that pose a potential hazard or may cut, crush, shock, or otherwise injure associates. Example: Moving clamps or pinch hazards such as pulleys, gears, cutting devices, presses, etc. This includes any equipment or machinery that moves. Example: Parts buggies, carts, and material handling equipment. Safety Yellow DC9400 DTM Safety Yellow (OSHA Safety Yellow) Any caution markings. All hard railings, mezzanines, lift truck guards. Any physical hazard which might result in stumbling, falling, tripping, striking against or being caught between. Trim on mesh safety guards – mesh painted flat black. Safety Red DC9000 DTM Safety Red (OSHA Safety Red) Sprinkler lines, fire alarm boxes, fire blanket boxes, fire extinguishers, fire exit signs, fire hose locations or columns, fire hydrants and fire pumps. Mark emergency stop bars on machinery or stop buttons and electrical switches. Safety Blue DC9800 DTM Safety Blue (OSHA Safety Blue) Used for designating information signs, bulletin boards, or as a border aroun