红花花丝二维中心点标定方法研究-计算机工程与应用.PDF

176 2018 ，54（15） Computer Engineering and Applications 计算机工程与应用 红花花丝二维中心点标定方法研究 用 张天勇，张立新，葛 云，王 欢，刘光欣 应 ZHANG Tianyong, ZHANG Lixin, GE Yun, WANG Huan, LIU Guangxin 与 石河子大学 机械电气工程学院，新疆 石河子 832000 程 College of Mechanical and Electrical Engineering, Shihezi University, Shihezi, Xinjiang 832000, China g 工 r o ZHANG Tianyong, ZHANG Lixin, GE Yun, et al. Study on two dimensional center point calibration method for . j safflower filaments. Computer Engineering and Applications, 2018, 54 （15）：176-180. 机 a 算 e Abstract ：In order to realize the accurate identification of safflower filaments and locate the center point, a method of c . identifying the coordinates of the filaments and marking the two dimensional center points is proposed based on the MA- 计 w TALB processing software. According to the color characteristics of the filaments, the color difference method is used to compare and analyze. The method of maximum inter class variance is used to extract the contour of the filaments. An im- w proved morphological processing method is proposed to transform the contour of the filament based on the cluster charac- w teristics of safflower. In the end, a two dimensional center point coordinate is obtained by combining the weighted cen- troid method and the maximum internal tangential circle method to improve the accuracy. The experimental results show that the method can effectively identify and extract two dimensional ce