（毕业学术论文设计）-可扣盒盖成型工艺及模具设计.docVIP

lw 本科毕业设计(论文) 题目： 可扣盒盖成型工艺及模具设计 学 院： 专 业： 班 级： 学 号： 学生姓名： 指导老师： 提交日期： lw 可扣盒盖成型工艺及模具设计 学生姓名： 指导教师： 浙江工业大学机械学院 摘 要 本文详细地阐述了盒盖注射模具的设计过程。根据塑件的产品数量及结构要求，本模具采用一模一腔。设计了注射模具中的各个系统，如浇注系统、导向与定位机构、侧向分型与抽芯机构，并对塑料材料性能进行了分析。整个设计采用UG／Mold Wizard软件进行参数化设计，尤其是对Moldflow使用，使整个模具设计过程简单明了。利用Moldflow软件进行模流分析，为模具设计和成型工艺的指定提供参照依据。使用UG／Mold Wizard软件设计成型零件以及非标零件，从而进行全方面的参数化设计，即对模具进行分模、生成元件、装配、试模、开模等设计。调用标准模架以及标准件，从而完成模具的整体设计。本模具设计了侧向分型与抽芯机构，构成了本次模具设计的主要内容。最后利用CAD软件完成模具装配图和主要零件图的绘制。 关键词：注射模 侧向抽芯和滑块 Moldflow 盒盖  The mold design and molding process of box cover Student: Hu Lixing Advisor: Jiang shaofei College of Engineering Zhejiang University of Technology ABSTRACT This article has elaborated the injection mould design of the box cover. Considering the number of the production and the structural , this mould is one mould with one cavity . Designed all system of the injecting mould , orientating institution, side parting and core-pulling mechanism. Besides, analyzing material capabilities . The whole design processes are all according to the foundation of the software of UG／Mold Wizard ,Particularly being to the usage of the Moldflow make the whole mould design process is simple and clear. Using Moldflow carries through model stream analysis ,for mould design and type technology to offer reference basis. Then using UG／Mold Wizard to carries out moulding parts and understanding parts, according the whole Parameter melts to design , namely carrying through dividing mould ,generation element and examination mould, open mould. Basing the characteristic of the mold, the side parting and core-pulling mechanism .These things also constituted main contents of this die design. At last, using the 2D CAD software to finish the assembly drawing and the main part drawings. Key：Injection mould，Side core-pulling and the slider , Moldflow ，box cover 目录 TOC \o 1-3 \h \z \u HYPERLI