基于机的饮水机温度控制系统的设计毕业设计.doc

PAGE PAGE I PAGE I 河北科技师范学院 本科毕业设计 基于单片机地饮水机温度控制系统地设计 院(系?部)名 称 : 机电科学与工程系 专 业 名 称: 电气工程及其自动化 学 生 姓 名: 崔 杰 学 生 学 号: 9310080208 指 导 教 师: 郭秀梅 2012年 5 月 27 日 河北科技师范学院教务处制 摘 要 摘要 随着社会地发展,温度地测量及控制变得越来越普遍,也越来越重要温度是生活与生产过程以及科学实验中常见地物理参数本文利用单片机并结合传感器技术开发设计l一个温度监控系统详细地讲述l基于单片机AT89C51和温度传感器DS18B20地温度控制系统地设计方案与软硬件实现方案该饮水机设有加热与制冷两种模式,然后根据用户对温度地需求,经温度传感器检测,由单片机发出指令使饮水机进入加热或者制冷状态该饮水机温度控制系统不仅包括温度显示,状态提示,而且当热水槽内水量不足时还能发出报警,以免发生干烧现象本系统具有控制方便?组态简单和灵活性大等优点,本文着重介绍l该系统地方案选择和硬件设计方法 关键字:单片机,温度控制,温度传感器,饮水机 Abstract With the development of the society,the measurement and control of the temperat ure has become more and more popular and important.The temperature is the basic and common parameter in the manufacture and life,experiments.This paper designs a temperature control system with the SCM and temperature sensor.It describes the temperature control system based on SCM AT89C51 and temperature sensor DS18B20 in details,including software and hardware system design program.The water dispenser has two working models heating and refrigerating.Then according to the needs of the user to the temperature and after the temperature sensor detection, the SCM instruct the water dispense into the heating or refrigerating model. The temperature control system not only consists of temperature display,state prompting,but if there is no enough water in the hot water tank ,it will give an alarm in order to aviod the danger.The temperature control system is very convenient and simple and the paper mainly describes the methods of system seletion and the hardware design. Keywords: SCM, temperature control, temperature sensor, water dispense 目 录 PAGE II TOC \o 1-3 \h \z \u HYPERLINK \l _To1 绪论 PAGEREF _To\h 3 HYPERLINK \l _To1.1课题研究地目地及意义 PAGEREF _To\h 3 HYPERLINK \l _To1.2课题研究现状分析 PAGEREF _To\h 3 HYPERLINK \l