组合思想在钛合金研究中应用与钛合金组合芯片表征.PDFVIP

20 1 2010 10 Vol.20 Special 1 The Chinese Journal of Nonferrous Metals Oct. 2010 1004-0609(2010)S1-s0930-07 ( 710016) Ti-Al-V Ti-Al-V-Cr-Mo 2 IM100 X (XRD) (AFM) X (XPS) Ti-Al-V Ti-Al-V-Cr-Mo 2 TF 804.3 A Application of COMBI in study of titanium alloys and characterization of titanium combinatorial libraries QIN Dong-yang, LU Ya-feng ( Northwest Institute for Non-ferrous Metal Research, Xi’an 710016, China) Abstract: The application of the combinatorial material chip technology (COMBI) which is widely used in research of titanium alloys was summarized. For a multi-element titanium alloy system, it is possible to explore the relationship between alloying element contents and mechanical properties. On the basis of this method, two typical material chips of titanium alloys such as Ti-Al-V and Ti-Al-V-Cr-Mo system were fabricated by an ion beam sputtering method in the form of combinatorial material chip. The phase transformations of the samples in the libraries were identified by XRD. The morphology of samples were observed by the atomic force microscope (AFM). The chemical states of the elements in the libraries were characterized by X-ray photoelectron spectrocopy (XPS). The nanoindentation experiments were carried out to extract the hardness of the films. Furthermore, the composition with the highest hardness in each library were selected. Key words: titanium alloys; phase transformations; thin films; combinatorial method