【Hirschmann】CCTV_WiFi_EN_06-10-(精选·课件).pptVIP

Example for CCTV installation over Wireless (Hirschmann BAT) Olaf Schilperoort June 2010 Position of Cameras Distances Network structure Bandwidth calculation Device list List of material List of material List of material List of material * 3 Mbit/s per camera 15 cameras 80m 200m Solution of BAT inside additional housing BAT54-Rail Client BAT54-Rail Client BAT54-Rail Client BAT54-Rail Client BAT54-Rail Client BAT54-Rail Client BAT54-Rail Client BAT54-Rail Client BAT54-Rail * 4 Configuration 4 BAT54-Rail (2 radio modules) in AP mode in centre of the site 8 BAT54-Rail Clients at the edges Each AP radio module serves only one client 2 cameras per BAT Client (each 6 Mbps) Débits 2 cameras per BAT Client (each 6 Mbps net) must be assured Distances max 100 m estimated Gross bandwidth to be assured : 24 Mbps Frequencies used : sub band 2 outdoor 5GHz This calculation example uses 18dBi antennas at Client side and omnidirectional antennas at central side. These are easy to mount. 2m antenna cable is considered per antenna plus overvoltage protector. 24Mbps is possible until a distance of 400m BAT54-Rail Client Cable coax 2-N m-m BAT-CLB-2N m-m BAT-ANT-N-18A-V-IP65 Housing with camera + Wireless BAT Protector RPS15 LANs (towards camera 1 and 2) BAT-Pigtail (included with antenna) Mats (* 8) 220VAC 24VDC BAT54-Rail Cables coax 2-N m-m BAT-CLB-2N m-m BAT-Pigtail (included) BAT-ANT-N-5A-IP65 Coffret(s) Wireless BAT Protector Batiment (*4) 24VDC RPS15 220VAC BAT-ANT-N-5A-IP65 Modules : BAT54-Rail Client * 8 BAT54-Rail * 4 RPS15 * 12 Accessories: BAT-ANT-Protector m-f * 12 Antennas / cables: BAT-CLB-2-N m-f * 12 BAT-ANT-N-18A-V-IP65 * 8 BAT-ANT-N-5A-IP65 * 4 Solution WiFi with IP67 BAT54-F Client BAT54-F Client BAT54-F Client BAT54-F Client BAT54-F Client BAT54-F Client BAT54-F Client BAT54-F Client BAT54-F * 4 Configuration 4 BAT54-F (2 radio modules) in AP mode on central side 8 BAT54-F Client Similar to calculation as with BAT54-Rail Mounting option wi