【SMT资料】Strain gage measurement History and experiences(PPT,36页)知识分享.pptVIP

* 豆丁-精品文档/sundae_meng 无忧PPT整理发布 * 豆丁-精品文档/sundae_meng Strain gage measurement History and experiences * 1-2. Condition Original ICT fixture plate Trials for root cause 2/12 * 1-3. Results There is a gap Trials for root cause 3/12 * 1-4. Analysis ＊The solder joint in the PCB is well. ＊ There is a crack between the substrate and solder ball. ＊ The defect was found after ICT, it may be caused by ICT fixture. ＊ The strain degree is around 800~1000 με . (With BGA on board) Trials for root cause 4/12 * 2.Second trial 2-1. Ste