超低频井下通信系统发射机的开发研究-电磁场与微波技术专业论文.docxVIP

华 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract The technique of large power super low frequency communication is attached great importance as a new research field in current international situation. It can be widely used in several kinds of circumstances, such as, communication systems under-well / underwater, sea / earthquake monitoring, nucleus scarp processing and environment protection application, etc. As a matter of fact, the super low frequency communication is not very mature in our country. The research of the super low frequency data acquisition system is achieved in this thesis due to the practical needs of the super frequency communication. Tt can be used in wireless communication system such as under-well ,underground or underwater communication.The whole system is made up of two parts which are transmitter and receiver.There are detailed designs of software and hardware parts. Since there are many shortcomings in the traditional low - frequency wireless communication systems such as excessive circuit components, system complexity and inconvenience of hardware debugging, this thesis presents a new approach that using Single - Chip Microprocessor (SCM) software modulation instead of the traditional hardware modulation to reduce circuit components and simplify the system structure. In this system, the emission frequency range of electromagnetic wave is between 1Hz and 100Hz using digital pulse width modulation (DPWM). All these efforts will be completed by SCM software programming. The receiver is composed of microcontroller, the design of the power supply, the circuit of power converting ,digital power amplifier and enable circuit. The standard RS232 port is used for the communication of the receiver, which makes the communication more stable and accurate. In all, through being debugged and tested,the communication system comes true. And it provides a model for the designing work of a communication system in super-low frequency. Key Words super-low frequency，