热水锅炉毕业设计范本.docxVIP

热水锅炉毕业设计 篇一：毕业设计说明书-----锅炉设计　　摘要　　在SHL10-1.25/250-AⅢ型锅炉设计中，我们通过设计任务书给定的设计参数以及参考相关设计资料，进行初步设计与热力计算。该设计的内容包括燃料与燃烧计算、锅炉热平衡计算、锅炉炉膛、防渣管、过热器、锅炉管束等设备的热力计算。在热力计算中，利用先假设后校核，逐次逼近法，进行计算，同时确定炉体及相关部件的尺寸和各个受热面面积及布置形式。在设计当中，查阅了许多有关链条锅炉方面的资料，这种锅炉在现代工业发展中被普遍运用，而且技术越来越成熟，所以为本课题的链条锅炉设计提供了很大的帮助，进而完成了本次双锅筒横置式链条炉排锅炉的初步热力计算和基本结构设计。本次设计还包括任务说明书，计算说明书、锅炉本体图，空气预热器零件图，省煤器零件图。 　　关键词:链条炉；锅炉炉膛；热力计算。 　　Abstract　　According to design parameters that has given design and the relevant design information,we make heat calculations and preliminary design calculation on SHL10-1.25/250-A Ⅲ boiler.The main contents include introduction, fuel andcombustion calculations, boiler heat calculation balance, boiler furnace,anti-thermal residue management and other computing devices.In the thermal calculation, firstly,we use the methods of assumptions, and then check them and successive approximation to calculateing .Simultaneously,we determine the size of furnace and related components and layout of various heating surface.In the design, through a lot of information about the chain boiler, this boileris are widely used in the modern industry, and the technology is more and more ripe, so it provides a helpful program for the subject-based chain boiler design.this design also includes mission statement ,calculation specifications,the CAD chart of the boiler body , air preheater and economizer. 　　Keywords: chain boiler ; furnace ;thermal calculation. 　　目录　　1绪论 ................................................................. 1　　1.1 设计题目的提出 ................................................ 1　　1.1.1 工业锅炉的概述 .......................................... 1　　1.1.2 燃煤工业锅炉燃烧现状 .................................... 1　　1.2 国内外研究现状 ................................................ 2　　1.3 设计内容与研究方法 ............................................ 2　　1.3.1 设计主要内容 ............................................ 3　　1.3.2 研究方法 ................................................ 3　　1.3.3 校核热力计算主要内容 .............................