南理工EDA2(优秀).pdfVIP

EDA2 多功能数字钟设计 EDA 实验二 多功能数字钟 院系：电子工程与光电技术学院 学号： 姓名: 指导老师： 时间：2012 年 11 月 1 EDA2 多功能数字钟设计 摘要 本实验通过使用 Quartus Ⅱ软件，并结合数字逻辑电路的知识设计多功能数 字钟，可以实现正常的时、分、秒的计数功能，分别由六个数码管显示计时，可 以利用开关实现系统的计时保持、清零和校分、校时、校星期的功能。同时，该 电路系统还可以完成在5953 , 5955 , 5957 低音报时, 5959 高音报时的 基本功能。在此基础上，本实验还设计了扩展功能，包括星期计时、校星期以及 通过开关与门电路切换到秒表计时的功能。我原本还尝试设计闹钟的功能，但是 闹钟的扩展功能还不够完善，目前完成了切换显示部分，但是报时还存在缺陷。 在利用 Quartus Ⅱ进行相应的设计、仿真、调试后下载到SmartSOPC 实验系统上 验证设计的正确性。 关键词 QuartusII，数字钟，分频，计时显示，保持清零，校分校时校星期，报时，星期 计数，秒表 ，闹钟 Abstract This experiment is based on Quartus Ⅱ ，with the help of knowledge regarding the digital logic circuits and system design,to design a multifunctional digital clock. The basic function of the multifunctional digital clock is a 24-hour timer, and the exact time can be showed by six led lights. Also we can achieve the functions like time keeping, clearing and time and week adjusting by using the switches. Beyond the basic function, I improved the multifunctional digital clock and it can beep in low frequency at 5953 , 5955 , 5957 and in high frequency at 5959 . Based on this the basic design,I also design extra functions,including week timer ,week-time adusting and the stopwatch which can be exchanged by using the switchs and several circuits of logic and doors.Also I intended to design the alarm clock.，but unfortunately， the extra function of alarm clock is not perfect.Currently,I just have finished the functions containing the parts of exchange and display.But the part of beeping still needs improved.All the designing and simulating work are based on Quartus Ⅱ. After all the work finished on computer, I downloaded the