黄铜高速雕模最佳切削参数试验.PDF

切 參數 年六 切 參數 理 CNC 精 參數切 率量 冷 切 參數 度 參數 24000rpm 率1200mm/min 量 0.09mm 冷 行切 參數 An Experimental Investigation on Optimum Cutting Parameters for High-speed Engraving Process of Brass Dar-Yuan Chang Abstract High-speed CNC engraving machine is an important device in the manufacturing of precision embossing die and EDM electrode. The aim of this project is to investigate the influences of process parameters on the machining quality. Four process parameters including spindle speed, tool feedrate, tool transverse amount, and cooling condition are discussed, and then the surface roughness is used to evaluate the machining quality of the brass four-axes engraving parts. Experimental results find that the optimal factors level combination is under the spindle speed of 24000 rpm, the tool feedrate of 1200mm/min, the tool transverse amount of 0.09 mm and machining in an air cooling condition. Keywords : High-speed engraving, Analysis process parameters, Taguchi ’s method. 315 CNC 度 理 了切 行 數參 數力切力料數 1-4 切力 更更理論 2類路 1,4 立參數金 5-9 見 切不料不( 度) 切參數(切度 度 冷) 度狀1 度 理 y (T )料 兩類 料 切 精 量 切 度