- 1、本文档共15页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
372-03 T
Explanation of codes:
Conditions
Unsatisfactory starting condition : - Butterfly switch not in neutral position -
1 Or potentiometer supply voltage is too low.
启动条件不合适—加速器不在中位或加速器电源电压太低
Butterfly switch is in neutral position (according to measured input voltage)
2
加速器在中位(根据测量输入电压)
Tiller released (according to measured input voltage)
3
舵柄释放(根据测量输入电压)
Booster function active (parameter in pathfinder)
4 助力功能激活(参数在pathfinder 中)
Butterfly switch, platform, guardrail and presence match pedestrian or
5 rideon mode
在骑行模式
Butterfly switch, platform, guardrail and presence match the walk mode
6
在步行模式
Butterfly switch, platform, guardrail and presence match ride mode without
7 guardrail
在骑行模式但无护栏
Butterfly switch, platform, guardrail and presence match ride mode with
8 Guardrail
有护栏的骑行模式
Power disabled if all microprocessor inputs are not actives
9
若所有处理器没有输入功率单元禁止
Steering angle is out of tolerance
10
转向角度差过允许范围
The controller is in Passive mode
11
无效的控制器
Steering angle (analog or CAN) value is exceed first threshold
13
转向角度(模拟或CAN)值超过最初极限
Steering angle (analog or CAN) value is exceed second threshold
14
转向角度(模拟或CAN)值超过第二极限
Truck doesnt move instead a torque is applied
19
扭矩提供但叉车没有移动
The belly switch function is activated by the position of the platform, the
20 tiller and the belly switch processor
腹部开关功能
The belly function still active. To reset it turn the butterfly into neutral
21 position
腹部开关功能还在活动. 去复位蝶形开关到中位
Truck with platform : Belly function is not active due to platform position,
tiller and belly switches. Truck without platform : Belly function is not active
due to tiller and belly switches
22
叉车有站板,:腹部开关功能不激活,因为站板位置,舵柄和蝶形开关
没有平台:腹部开关功能不激活,由于舵柄和蝶形开关
The belly function is ready due to the platform position, tiller and belly
23 switches
腹部功能准备,因为站台位置,舵柄和腹部开关
文档评论(0)