反应流模拟的有限体积法的比较-计算机工程与应用.PDFVIP

Computer Engineering and Applications 计算机工程与应用 2017 ，53（15） 63 反应流模拟的有限体积法的比较 用 1 2 2 侯庆志 ，沈嘉渊 ，魏建国 应 1 2 2 HOU Qingzhi , SHEN Jiayuan , WEI Jianguo 与 1.天津大学 计算机科学与技术学院，天津 300354 2.天津大学 软件学院，天津 300354 程 g r 1.School of Computer Science and Technology, Tianjin University, Tianjin 300354, China 工 o 2.School of Software, Tianjin University, Tianjin 300354, China . 机 j a HOU Qingzhi, SHEN Jiayuan, WEI Jianguo. Comparison of finite volume methods for numerical simulation of 算 e reacting flow. Computer Engineering and Applications, 2017, 53 （15）：63-67. c 计 . Abstract: For the numerical simulation of reacting flow, a unified flux scheme is deduced according to the finite volume w method. Fluxes corresponding to ten different methods are obtained and their numerical behavior is systematically w compared. It is shown that the first-order accuratemethods like the upwind and Lax-Friedrichs （LF ）schemes, the second- w order accuratemethods including the second order upwind, Lax-Wendroff, Beam-Warming and Fromm schemes, and the third-order accurate QUICK scheme, will cause serious either numericaldissipation orunphysical oscillation, due to which numerical accuracy is remarkably reduced. The modified TVD-LF （MTVDLF ）scheme with a flux limiter can eliminate both the numerical dissipation and unphysical oscillation, and the Superbee limiter is most suitable for the simulation of reacting flow. Key words: autocatalytic reaction; convection reaction; finite volume method; flux scheme 摘 要：针对自催化反应流模型的计算，推导了基于有限体积方法的统一通量格式以及十种常用格式的具体形式，