《接触氧化法处理食品厂废水的工艺设计论文》-毕业论文.doc

PAGE 毕业设计（论文）中文摘要 接触氧化法处理食品厂废水的工艺设计 摘要： 本次毕业设计研究了食品加工厂的工业废水处理工艺流程。根据进水水质、进水量、排放要求等条件，就废水处理规模、工艺处理流程、设备选型等方面进行编制。选择合理、可靠的好氧处理工艺——接触氧化法，这种方法是一种既经济，净化效果又好的废水处理方法。 本工艺流程由中和调节池、曝气沉砂池、斜板式沉淀池(初沉池)、生物接触氧化池、竖流式沉淀池(二沉池)、污泥浓缩池、污泥匀质池、污泥消化池、污泥脱水泵房等几大部分组成。本工艺具有处理时间短、体积小、净化效果好、出水水质好而稳定、污泥不需回流也不膨胀、耗电小等优点。 处理后的水质达到《城镇污水处理厂污染物排放标准》(GB18918-2002) 二级排放标准。 关键词：废水处理 好氧生物处理 接触氧化 毕业设计（论文）外文摘要 Title Contact oxidation process for treatment food wastewater process design Abstract The design aims to study on the food processing plant of industrial wastewater treatment process.According to feed water quality, water, emissions into the condition such as required, wastewater treatment, process flow, the scale of equipment type selection of and so on. Choose reasonable and reliable aerobic process-contact oxidation method, the method is a already economy, purifying effect and good wastewater treatment. This process by and regulation ponds, aeration sink sand pool, inclined plate traps (first pond), biological contact oxidation ponds, vertical flow sediment basins (the second pond), sludge concentration pool, sludge pond, sludge and digestive pool, sludge dewatering composed of several pump room, etc. This process has the processing time is short, small volume, purifying effect is good, water and stability, sludge does not need to not return the advantages of small expansion, low power consumption. Treated water reached the urban sewage treatment plant emissions standards (GB18918-2002) secondary emission standard. Keywords： Wastewater treatment Aerobic biological treatment Contact oxidation 目 次 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc325662518 1 引言 PAGEREF _Toc325662518 \h 1 HYPERLINK \l _Toc325662519 1.1 国内食品厂废水现状 PAGEREF _Toc325662519 \h 1 HYPERLINK \l _Toc325662520 1.2 食品废水及其性质 PAGEREF _Toc325662520 \h 1 HYPERLINK \l _Toc325662521 1.3 国内外食品废水处理技术 PAGEREF _Toc325662521 \h 2 HYPERLINK \l _Toc325662522 1.4 主要设计内容 PAGEREF _Toc325662522 \h 2 HYPERLI