《胀筋机液压系统毕业说明书》-毕业论文.docVIP

太原科技大学本科毕业设计（论文） 胀筋机液压系统 Bulging tendons hydraulic system 学 院（系）： 机械工程学院 专 业： 液压 学 生 姓 名： 学 号： 指 导 教 师： 评 阅 教 师： 完 成 日 期： 太原科技大学 Taiyuan University of Science and Technology 太原科技大学本科毕业设计（胀筋机液压系统） - PAGE VI - 摘 要 本说明书主要关于胀筋机液压系统的设计和论证说明。根据系统的工况，分析和拟订了系统原理图。在满足系统要求的前提下，对各标准元件进行了选取和校核，并对液压传动部分非标准零部件进行了计算、设计。其中主要包括系统原理设计、液压站设计、阀组油路体以及油箱部件中的零件设计。最后根据稳定、安全、美观和维修方便等对电机、液压泵、叠加阀组和冷却器、回油过滤器等进行管道布局、连接和固定进行了设计。此胀筋机机主要实现了上料器上料，左、右主轴箱同步前进并夹住钢桶通体，上料器退回，左胀筋头胀、退，右胀筋头胀、退，左、右主轴箱退为一个周期的动作。 关键词：液压系统 胀筋机 油桶 Abstract This text is mainly about the proof and design of the Hydraulic Bulging tendons system. According to the conditions of the system, the schematic was analyzed and decided. Having met the system requirements， the standard components were selected and checked，and some non-standard components for hydraulic were designed after the calculation, which mainly include the design of system principle， hydraulic station，oil body of the valve and the parts of the tank design. Finally, based on the stability，?security，?aesthetics，?easy maintenance pipelines and so on， I designed the layout，connection and regularization of motors，?hydraulic pumps，?valves ,cooler?stack and back to the?oil filter. This bulging tendons machine is mainly achieved on the feeder loading, headstock move around, clamp the steel drums, the feeder back, the left head bulging tendons swelling, back and right head bulging tendons expansion, back, left back spindle box and other activities. Key words: Hydraulic system The bulging tendons machine Oil Drums 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc296527541 摘 要 PAGEREF _Toc296527541 \h II HYPERLINK \l _Toc296527542 Abstract PAGEREF _Toc296527542 \h III HYPERLINK \l _Toc296527543 引 言 PAGEREF _Toc296527543 \h 1 HYPERLINK \l _Toc296527544 第一章·胀筋机简介 PAGEREF _Toc296527544 \h 2 HYPERLINK \l _Toc296527545 1·1双头胀筋机的用途 PAGEREF _Toc296527545 \h 2 HYPERL