《带钢冷轧机直流调速系统设计与仿真》-毕业论文.docVIP

PAGE 4 1 毕 业 论 文 题 目： 带钢冷轧机直流调速系统设计与仿真 英文题目：The strip of cold rolling mill dc speed control system design and simulation 二零 年 月 日 摘 要 作为电力传动的主要动力设备，根据不同的工作要求，对转速有特殊限制来满足特定的生产需求。直流电动机控制性能好，加上双闭环调速的介入，使启动性能和抗干扰性能大大改善。做好双闭环调速系统的研究十分重要。 目前直流电动机的调速较多采用了电流和转速双闭环控制。且转速调节器采用了PI调节，既可以保证动态稳定，而且可以消除静态误差，另外通过引入电流截至负反馈还能限制电流冲击。电流和转速分开控制，从而得到了较好的动静态特性。 依据电流和转速两个调节器构成直流电动机双闭环调速系统，建立数学模型，分析启动过程和抗干扰调解过程，并依据要求设计电流调节器和转速调节器，在进行必要的硬件电路的设计与调试，最后运用MATLAB软件进行电流环和转速环的动作仿真。 关键词:双闭环；直流电动机调速；转速调节器；MATLAB ABSTRACT As the main motive power transmission equipment, according to the different requirements of speed limit, to meet the special needs of specific production. Dc motor control performance is good, plus double closed loop speed regulation, make start-up performance and anti-jamming performance improved. Do double closed loop speed regulation system of study is very important. Currently the dc current and speed is more USES double closed loop speed. And the speed regulator USES PI, can guarantee dynamic stability, and can eliminate static error, through introducing the current negative feedback can also limited by current shock. Current and speed control, separate to obtain better dynamic and static characteristics. According to the current and speed regulator constitute two dc double closed loop speed regulation system, the mathematical model is analyzed, and the anti-interference mediation process start-up process, and according to the requirements and the design of speed regulator, current regulator in the hardware circuit to the design and debug, finally using MATLAB software current loop and the movement speed loop simulation. Key Words: double closed loop speed; DC current regulator; the speed regulator; MATLAB 目 录 TOC \o 1-4 \h \u HYPERLINK \l _Toc326647232 绪论 PAGEREF _Toc326647232 \h 1 HYPERLINK \l _Toc326647233 1.1 概述 PAGEREF _Toc326647233 \h 1 HYPERLINK \l _Toc326647234 2冷轧机的概念 PAGEREF _Toc326647234 \h 2 HYPERLINK \l _Toc3