《家用电风扇叶片注塑模具设计》-毕业论文.docVIP

摘要 本论文阐述一套用于生产风扇叶片的注塑模具设计，给定参数：风扇直径30CM，风扇功率45W来进行设计。设计时首先设计出塑件模型，然后选择合适的材料，接下来再进行模具设计（此次设计应用Pro/E野火4.0版设计）。包括设计模具的成型系统、浇注系统、冷却系统、导向系统、脱模系统等。设计的重点在于成型系统和浇注系统与脱模系统，而成型系统的重点在于分型面的设计，它决定了型芯和型腔结构以及模具的质量。因为扇叶塑件比较特殊，叶片的厚度较薄，所以浇注系统浇口和主分流道的选择显得尤为重要。 在设计中,通过合理设计推出机构和脱模机构，保证了扇叶脱模时受力均匀，避免了叶片变形、扭曲。最后，通过选用合适的标准模架，设计出一套完整的模具。此外,为保证设计合理，对注塑件进行各种工艺仿真，提高了模具的设计效率！ 关键词：风扇叶片；注塑模具；Pro/E设计；分型面；成型系统；浇注系统 ABSTRACT This paper need to design a set of injection molds for the production of fan blade. Given parameters: fan diameter 30CM, fan power 45W. Firstly the designation should design plastic model, and then select the appropriate materials, then you can design the mould system. The system includes molding system, pouring system, cooling systems, guidance systems, mold release system and so on. The importance are molding system and pouring system. The importance of the molding system is designing parting surface, it influent Core and cavity structure and the quality of the mold; As the blade is very thin, the designation of pouring system is more important. Of course, Introduced institutions and Stripping institutions must also be carefully designed. The molding institutions like blades must be even by force, otherwise the blade is easily deformed and distorted. At last, choose a standard mold base to form a complete set of molds. But during the design process, you must do various simulation to avoiding problems in the production process! Keywords: fan blades; parting surface; Pro/E; injection mould forming system; gate system  目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc326526713 第一章 前言 PAGEREF _Toc326526713 \h 1 HYPERLINK \l _Toc326526714 1.1研究的意义 PAGEREF _Toc326526714 \h 1 HYPERLINK \l _Toc326526715 1.2国内外研究动态 PAGEREF _Toc326526715 \h 1 HYPERLINK \l _Toc326526716 1.3设计的任务和要求 PAGEREF _Toc326526716 \h 3 HYPERLINK \l _Toc326526717 第二章 风扇造型和材料选择 PAGEREF _Toc326526717 \h 4 HYPERLINK \l _Toc326526718 2.1风扇造型 PAGEREF _Toc326526718 \h 4 HYPERLINK \l _Toc326526719 2.2材料选择 PAGEREF