毕业设计（论文）-输送滚床的控制系统设计.docVIP

全套图纸加153893706 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT II 摘 要 在激烈的汽车行业竞争中，改良旧的生产线和建造新的更为先进的生产线成为了行业的发展趋势。输送滚床是生产线传输的枢纽，同时起到各个工位的衔接作用，对整条生产线的工作起了决定性的作用。这使得输送滚床作为一个独立的控制系统出现在生产线中。 本设计是基于S7-300PLC的输送滚床控制，在系统中以S7-300为控制核心，依靠SEW变频器来控制滚床电机的传动，实现电机的加速、减速和停止等动作。以光纤为介质通过现场总线进行信号的传递，实现了信号之间的快速交替，接近开关检测滚床的检测信号并反馈给PLC来控制滚床的动作，SEW电动机为滚床的核心，主要起到传动的作用。 本系统与原有的滚床控制系统相比，大大的提高了生产，节约了劳动力，是生产上的一次改进。系统充分的利用现场总线的功能，使系统的结构变得简单，更好的达到了控制要求。 关键词: PLC SEW变频器 现场总线 Roller bed conveyor control system Abstract In the fierce competition in the automotive industry, improved the old production line and the construction of new more advanced production line has become the development trend of the industry.Conveying roller is a production line transport hub, also play a role in linking up each station, the entire production line work plays a decisive role in.This makes a conveying roller as an independent control system in the production line. This design is based on the S7-300PLC conveyor roller bed control system, this system with S7-400 as the control center, relying on SEW inverter to control the roller bed motor drive, the motor acceleration, deceleration and stop such actions. To optical fiber as the medium through the field bus for signal transmission, to achieve the rapid alternation between the signal, close to the switching signal as a rolling test bed, and feedback to the PLC control roller bed action, SEW motor for the roller bed of the core, the main effect role to drive the system. This system compared with the original of the rolling machine control system, greatly improves the production, saving labor, is an improvement on the production. Use of fieldbus function adequately system, make the system has a simple structure, better meet the control requirements. Key words:programmable controller SEW inverter Fieldbus 目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc10044 第一章 绪论 PAGEREF _Toc10044 1 HYPERLINK \l _Toc17113 1.1 研究的目的和意义 PAGEREF _Toc17113 1 HYPER