采矿工程毕业设计（论文）-开滦矿务局吕家坨矿300万ta新井设计.doc

全套图纸加153893706 - PAGE VI - - PAGE II - 摘要 本设计包括两个部分：一般部分和专题部分。 一般部分为开滦矿务局吕家坨矿新井设计，全篇共分为十个部分：矿井概括及井田地质特征、井田境界及储量、矿井工作制度和设计生产能力、井田开拓、采区巷道布置、采煤方法、井下运输、矿井提升、矿井通风与安全和矿井主要经济技术指标。 开滦矿务局吕家坨矿位于河北省唐山市古冶区境内，西距唐山18km，北距古冶9km。地理坐标为东经118°24，北纬39°40。矿区交通便利。井田内的可采煤层为8煤、9煤，其中主采为8煤，该煤层赋存稳定，平均厚度3.20米。倾角平均为10°，为缓斜厚煤层。井田内工业储量39272.00万吨，可采储量30213.00万吨。矿井平均涌水量为120m3/h，相对瓦斯涌出量8m 吕家坨矿年设计生产能力300万t/a，服务年限72年。采用单水平开采。矿井采用走向长壁综合机械化采煤法。 矿井布置一个综采工作面保证全矿井的产量，长度200m，煤的运输采用10t架线式电机车牵引1.5吨底卸式矿车运输。矿井的通风方式采用中央边界式通风。 关键词：井田盘区式划分；双立井开拓；单水平开采 ABSTRACT The design includes two parts: a general part and special part. The general part of Kailuan Mining Arai Fangezhuang mine design, the whole chapter is divided into ten parts: a general coal mine and mine geology, mine level and reserves, mine production capacity and design of work systems, mine development, mining area of roadway layout, mining methods, underground transport, mine hoist, mine ventilation and mine safety and the main economic and technical indicators.  Fangezhuang mine is located in the southeast wing of the Kaiping syncline, which isguyect of Tangshan City jurisdiction, 10.2 kilometers south of the railway stationguyeng in the railway station and the Jingshan line and Linxiguye mine, and highways through the mine field . Mine the coal seam to coal for 8, 9 coal, of which 8 main coal mining, the coal seam occurrence and stability, with an average thickness of 3.20 meters. Angle average of 5 °, inclined thick coal seam for ease. Mine industrial reserves of 392.72 million tons, recoverable reserves of 302.13 million tons. Water for the mine average 120m3 / h, the relative gas emission 8m3 / t, a low-gas coal mine, coal has the danger of dust explosion and spontaneous combustion phenomenon.  Fangezhuang ore production capacity of three million years t / a, length of service 72 years. Single-level mining. Mine used to mechanized longwall mining method.  Mine layout of a fully mechanized coal mining face to ensure that the output of the mi