《直流换流站极控EMTP模型设计与研究》-毕业论文.docVIP

w 桂林电子科技大学毕业设计（论文）报告用纸 摘 要 数值计算仿真方法主要是基于H.W.Dommel的经典电磁暂态理论。根据Dommel的理论，所以储存元件都可用梯形积分法将描述其支路特性的微分方程转化为一个电阻并联一个电流源的计算机离散模型。 本文对数值仿真中的基本问题进行了理解性分析，并利用仿真工具EMTP对一典型背靠背直流输电系统进行建模，论文介绍了建模的过程和相关的理论分析。对系统中的脉冲时序、触发滞后角、关断越前角等进行了系统的阐述，作为毕业设计的重点二次系统部分,为了更为熟悉EMTP的编程方法在这个基础上增加对电源的对时，完善了二次系统的控制功能。 经过上述对试验方案和实验结果的归纳总结，可以得出结论：此次所建EMTP模型，能够满足一般背靠背直流输电系统的模型建立，并进行数值仿真暂态分析，是可行的。 Abstract Lectromagnetic transient simulation is based on concepts introduced by H.W.Dommel in his classic paper of 1969. According to the Dommel algorithm, all passive components within the network can be converted to an equivalent resistor in parallel with a current source applying the trapezoidal rule of integration. We have an analysis of numerical simulation in this paper, and we also use a tool of numerical simulation named EMTP to build a model of the back-to-back HVDC system. The conduct and actions graduate the designs point subsystems are part of, for the sake of more for acquaint with the EMTP program’s method to increase on this foundation to control, perfectly second subsystems of power supply function. After we concluded the experiment-result we can receive the conclusion: the EMTP-model we created can content a generic model of back-to-back HVDC and analysis the numerical simulation of the system-electromagnetic-transient. that is we can do. key words: HVDC power transmission back-to-back HVDC numerical simulation electromagnetic transient 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc213169075 1 绪 论 PAGEREF _Toc213169075 \h 5 HYPERLINK \l _Toc213169076 1．1 直流输电的发展及特点 PAGEREF _Toc213169076 \h 5 HYPERLINK \l _Toc213169077 1.2 国内外直流输电仿真的研究现状 PAGEREF _Toc213169077 \h 6 HYPERLINK \l _Toc213169078 1.3 论文的主要内容 PAGEREF _Toc213169078 \h 7 HYPERLINK \l _Toc213169079 2 直流输电基本原理及控制部分时序分析 PAGEREF _Toc213169079 \h 8 HYPERLINK \l _Toc213169080 2.1 直流输电的基本原理 PAGEREF _Toc213169080 \h 8 HYPERLINK \l _Toc213169081 2.2 直流输电系统控制部分分析 PAGEREF _Toc213169081 \h 8 HYPERLINK \l _Toc213169082 2.3 直流输电系统