大跨度索穹顶结构施工过程模拟分析-结构工程专业论文.docx

Simulation on Whole Construction Process for Large Span Cable Dome Structure Specialty:Structural Engineering Name:Sun Shanxing Advisor:Prof. Zhao Ping Abstract Cable Dome, as a practical large-span flexible structure, was founded by Geiger of United States engineer. Since this structure appeared, more engineers and researchers have been attracted by its high structural efficiency. Domestic and foreign research has been very mature on the properties of cable dome structure of dynamic and static force, but very few studies on its construction technology. This is also one of the key factors for affecting the cable dome structure applications. Based on the first cable dome structure of China, after consulting many previous literatures, the advantages and characteristics, working mechanism and the engineering application of structure is summarized in this paper,The main research contents of this paper are put forward according to its research states. Flexible cable dome structure in the process of tensioning construction contains large deformation, the rigid body displacement and rotation, the process has the strong geometric nonlinear characteristic. So the forming analysis of cable dome structure must adopt nonlinear finite element method. The general construction method of cable dome was tensioned near the structure form, and the tension forming analysis is only near the equilibrium position, so it did not react the whole process of construction for components directly from the ground up to the equilibrium position. This article adopts the method of inverse simulation, using the large scale general finite element software ANSYS and its element birth or death technology, analysis the the integral lifting process of the cable dome structure, and compared with actual testing data,which verified the correctness and feasibility of simulation analysis. In order to study the effect of random construction error on the initial prestress distribution of cable dome