《心跳检测(应用Boost库)》-毕业论文设计.docxVIP

毕业设计(论文) 题 目 学院名称 计算机科学与技术学院 指导教师 职 称 班 级 本07计算机01班 学 号 学生姓名  目 录  摘 要 随着Internet快速发展，大量的P2P出现给人们的生活交流带来许多便利。然而由于人们需求的不断提高，对于P2P系统的可靠安全行性，同时也提出了新的要求。对于覆盖世界的网络中，随时都有可能出现故障。对于研究者希望P2P系统有自动检测到故障的原因自动修复的功能。在这方面许多人都在不断的进行研究实验。 本文研究的主要方面是P2P存储系统与故障维护中的心跳检测技术。心跳检测技术是一种检测网络连接故障的技术，根据服务端和客户端各自的心跳检测软件，相互之间发送消息即心跳报文来检测故障，判断网络连接是否正常，系统是否工作。这篇论文设计了一个能管理几百个外围节点的心跳检测系统。该系统是在Linux操作系统下，采用的TCP/UDP协议，以C/S模式，应用Boost库，以C++语言进行开发的。服务端为主控节点，客户端为外围节点，通过客户端发送心跳报文的方法来实现心跳检测。 关键词：P2P；心跳检测；Boost；Linux ABSTRACT Along with the Internet fast development, massive P2P appears for peoples life exchange brings many conveniences. However, as a result of the people demands unceasing enhancement, regarding the P2P systems reliable security line, simultaneously also set the new request. Regarding in the cover worlds network, It has the possibility to present the breakdown. Regarding the researcher hoped that the P2P system has the automatic detection breakdown reason and the automatic repair function. In this aspect many people are researching. This paper mainly researches the heart beat technology of P2P memory system and failure detection. Heat beat technology is the technology that it detects network fault, as sending messages between server and client. And it can estimate whether the network and P2P system are working naturally. The paper introduces the P2P system can manage hundreds of the client nodes . The system designs in the Linux platform, using TCP/UDP protocol, Boost libraries, C++ language and on the basis of C/S model. Server acts as the master node, the client acts as the external nodes, through the heart beat messages sent by the client to achieve the heart beat detection methods.  引 言 随着网络技术的快速发展，网络拉近人们之间的距离，于此同时大量的基于网络的系统也不断的出现。在网络这个庞大的系统中，有成千上万的节点接入到网络中共享资源信息。对于这些成千上万节点