磁头行业单元生产设施布置方法及应用研究-工业工程专业论文.docx

Classified Index: TP305 U.D.C: 338 Dissertation for the Master’s Degree of Engineering A STUDY OF CELLULAR LAYOUT METHOD AND APPLICATION IN MAGNETIC INDUSTRY Candidate: Xia Linwei Supervisor: Associate Prof. Tian Qing Associate Supervisor: Senior Engineer. Ma Hongtao Academic Degree Applied for: Master of Engineering Speciality: Industrial Engineering Affiliation: SAE magnetics(H.K)LTD Date of Defence: June,2010 Degree-Conferring-Institution: Harbin Institute of Technology - - I - C?  Jt lRWh_ Exten ds im  附 _ h 注  Extendsim - - II - Abstract Faced to dual pressure of strong competition and industrial technics renovation, it is very important for magnetic head industry to increase manufacturing capability including quick market response, low cost and high efficiency. Cellular manufacturing and layout planning are the key factors to get this capability. The aim of this thesis is to study a layout planning method which is suitable to cellular manufacturing in magnetic industry. First, the thesis reviewed the study on cellular layout method by specialist in overseas and home, then introduced the theory basis of this thesis: cellular manufacturing, systematic layout planning, group technology and simulation evaluation. Based on the study for characteristic and existing layout of production system, draw a conclusion that cellular manufacturing is suitable to the magnetic industry. The thesis developed systematic layout design method for cellular manufacturing based on systematic layout planning and group technology. Then took building new production line in W company as a sample, the thesis made a case study of work shop and production line layout design. Finally, the thesis evaluated this case in two steps: evaluation by index before implementation and simulation the production system by Extendsim software. Both of the result pr