大倾角液压支架稳定性及关键部件有限元分析-机械设计及理论专业论文.docx

- - PAGE VIII - Abstract In recent years, as Chinas rapid economic development, increasing demand for coal resources, coal resources are asking for more development, and mining for many years has been to mine occurrence conditions superior less and less coal reserves , which turned to coal reserves account for only 15-20% of large angle or up steep seam mining. China is generally believed that coal seam inclination 35 ° ~ 55 ° angle between the big coal, coal mining as big dip migration pressure behavior and the law of specificity, along with coal mining safety issues also stand out。Chinas large steep angle or fully mechanized coal face higher system reliability studies, and focused primarily on the reliability of face support equipment for the stand - rock system stability control research, that large angle or steeply inclined Workface reliability depends on the stability of support equipment, mechanized mining hydraulic support large angle stability of the coal face itself has a key role in the reliability of controlAlthough mechanized mining in the coal mining areas, China made great progress, but big dip the complexity of coal mining environment, mining process is not reliable, there are many factors that affect the stability of large angle hydraulic support, including people, the environment ( seam roof and floor rock), machine (equipment) in three areas,Personnel are not reliable mainly in the persons own and operate the equipment, maintenance, and organizational management;Environment, mainly in the coal seam roof and floor rock difficult to manage, take off the roof instability, floor damage, slip instability caused by the stent, down aircraft accident;Equipment unreliability mainly in hydraulic support easily lead to instability and poor support system reliability, there stand down, sliding, squeezing, biting aircraft and other serious problems, as well as coal mining, scraper conveyor decline in the stability of the stent.Therefore, in order to make a