1补强应用之可行性研究2.PDFVIP

[範例(不含作者資訊) ：中國土木水利工程學刊投稿稿件格式 2010-10-20] 稿件日期 2011-02-21 1 ○○○○○○○補強應用之可行性研究 2 3 關鍵詞： ○○○○○○ 、補強、抗壓強度、韌性指數 4 摘要 5 ○○○○○為一種新型膠結材料，具有低耗能、高性能價格比、易加工、耐燃及耐腐蝕/ 6 等特性，可作為劣化混凝土結構物之補強材料。本研究係以○○○○與○○○○製成○○○ 7 ○○○ 。首先探討液固比為0.45及三種不含砂量 (30 ，50及 70 %)之砂漿○○○○○材料性質， 8 然後將最佳性質○○○○○加添二種不同鋼纖維含量(0 %及 1.0 %)製作○○○○○補強材料 9 ，接著進行抗壓強度、抗彎強度、動彈性模數及超音波波速等工程性質試驗。試驗結果顯示 10 ：以○○○○○纖維砂漿作為圓柱試體補強之破壞型式轉為較高的韌性，而版、樑試體韌性 11 指數增加 25% ，因此，○○○○○具有作為劣化混凝土構造物補強材料之良好潛力。 12 第 1 頁，共 6 頁 1 FEASIBILITY STUDY ON RETROFITTING APPLICATION OF ○○○○○ 2 3 Keywords: ○○○○○, reinforced, compressive strength, toughness index 4 Abstract 5 ○○○○○ is a novel cementitious material with the characteristics of low energy-consumption, 6 high performance/price ratio, easy processing, fire resistance and corrosion resistance, etc., such 7 that it can be used as a retrofitting material for the deteriorating concrete structures. In this study, 8 the ○○○○○ paste was produced by using ○○○○○ and ○○○○○. First, the material 9 properties of ○○○○○ mortar with a fixed liquid/binder ratio of 0.45 and three different sand 10 contents of 30, 50 and 70% were investigated. The ○○○○○ mortar with optimum performance 11 was then added with two different amounts of steel fiber (0 % and 1.0 %) to manufacture the ○○ 12 ○○○ used as the retrofitting material. The engineering properties of compressive strength, 13 flexural strength, dynamic elastic modulus and ultrasonic pulse velocity were determined 14 experimentally. The experimental results show