分布式空时编码的分析-电路与系统专业论文.docx

南京邮电大学硕士研究生学位论文英文摘要 南京邮电大学硕士研究生学位论文 英文摘要 II II Abstract In order to meet the needs of high-rate and multi-service communication, the next generation wireless communication systems must be able to provide better mechanisms and techniques, not only to increase the transfer rate, but also to meet the various QoS requirements. Multiple-input-multiple-output (MIMO) technology can improve system capacity, as the result of mobile terminal’s size, it ’s unrealistic to configure multi-antenna on it, which leads to the limited use of MIMO technology. However, cooperative communication system combined MIMO technology through the relay nodes created a virtual antenna array could achieve spatial diversity and time diversity. As the sub-topics of National Natural Science Foundation (Project No., this thesis major research on the problem of power distribution between the source node and relay nodes in cooperative communication system. The thesis first described the MIMO technical and cooperative communication system, simply analyzed the development of these technologies at the present stage; then this thesis described MIMO technology and cooperative communication system’s models, basic realization of the principle, implementation process and the cooperative approach to be classifi ed; Second, analyzed MIMO communication system according to pair-wise error rate, described the design criteria for space-time code, analyzed several typical space-time codes and decode, then compared these typical space-time codes method by simulation; After that, according to the cooperative communication system’s model derived the guidelines of distributed space-time code, then analyzed several typical distributed space-time codes, compared and analyzed these types of distributive space-time codes and its space-time codes by simulation; Finally, the thesis according to the design of distributed space-time code criteria derived the optimal solution power distr