复合型有源电力滤波器的全数字化分析-电力电子与电力传动专业论文.docx

华中 科技 大 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract With the worldwide applications of power electronic equipments which are used as the nonlinear and time-variant load of the power system, the harmonics produced by them make power system suffer from severe pollution; the APF which is considered as effective equipments to restrain harmonics is widely being researched and applied. Based on the former research of APF, this article sum up the current researching states and technical keys, and propose a new-type parallel active filtering method, i.e. using composite APF. The composite APF is connected in parallel with harmonic source, control the output voltage of a inverter to follow the composite command voltage which is consist of fundamental voltage component of the connecting point and the grid harmonic current components, filter the high order harmonics and then inject it into the grid. When the composite command voltage satisfy a certain condition, APF exhibit low impedance which is almost zero to harmonic current, therefore dredge the harmonics flow to the APF branches. Simultaneously, it exhibits a variable reactor to fundamental current so as to compensate reactive power. The control system of the composite APF is consist of grid harmonic current components and fundamental voltage component detecting links, DC bus voltage controlling link, composite command voltage compounding link, PWM controlling link and driven circuit. The way to realize these links is analyzed and discussed in details and the control algorithm and some main circuit parameters are emulated in PSIM. The rationality of this composite control algorithm is proved by the emulation results. In order to put this composite control algorithm into practical application, a digital controlled prototype based on DSP chip TMS320F2812 is designed. The software of the control algorithm is programmed and debugged in CCS3.3. The harmonics compensating experiment is also conducted. The feasibility of this hybrid