引射式燃气灶燃烧性能数值模拟研究.pdf

中国科技论文在线 引射式燃气灶燃烧性能数值模拟研究 # 王元哲，张丹阳，唐志国** 230009 5 摘要：CFD COCO2 870℃ 1007℃ 15.75%CO 0.053% 0.064%20.75% CO2 4.27%4.73% 10 10.77%44.10% 46.36% 5.12% 关键词： 中图分类号：TS914.232 15 Numerical simulation research of combustion performance on an ejection gas burner Wang Yuanzhe, Zhang Danyang, Tang Zhiguo (School of Mechanical Engineering,Hefei University of Technology,Hefei 230009) Abstract: The combustion performance of an ejection gas burner is researched about numerical 20 simulation based on a CFD simulation software. The temperature field, the velocity field of fluid and the concentration distributions of CO, CO and water vapor are obtained during the combustion, and 2 the measured values are compared with the numerical simulation results. The results show that the average measured value of the maximum temperature of flame is 870℃, and the numerical simulation value is 1007 ℃. The relative error above is 15.75%. The average measured value of concentration of 25 CO in gas is 0.053%, and the numerical simulation value is 0.064%.The relative error above is 20.75%. The average measured value of concentration of CO in gas is 4.27%, and the numerical simulation 2 value is 4.73%.The relative error above is 10.77%. The average measured value of thermal efficiency is 44.10%, and the numerical simulation value is 46.36%.The relative error above is 5.12%. Key words: ejection gas burner;combustion perfofmance;numerical simulation;relative error