风力发电机塔架结构的设计方法分析-农业机械化工程专业论文.docx

IV IV 内蒙古科技大学硕士学位论文 intersection）; pillar diameter-thickness ratio??should be between 25 to 32; web member and pillar pipe stiffnessr ratio ??should be between 0.006 to 0.012. The 1.5 MW lattice type concrete filled steel tube wind turbine tower is designed, and carries on the strength, stiffness and stability control index analysis, verify the effectiveness of the proposed design method, has been clear about the pillar by the strength of the control in the design of tower, web meber controlled by the stability. Key Words：Concrete filled steel tube; Lattice tower; Design method; Parameter analysis; Control indicators 内蒙 内蒙古科技大学硕士学位论文 - - PAGE 1 - 目 录 摘 要 II Abstract III 1 绪论- 1 - HYPERLINK \l _bookmark0 1.1 风力发电概述 - 1 - HYPERLINK \l _bookmark1 1.1.1 国外风力发电现状 - 1 - HYPERLINK \l _bookmark2 1.1.2 国内风力发电现状 - 2 - HYPERLINK \l _bookmark3 1.2 风力发电机塔架研究现状 - 3 - HYPERLINK \l _bookmark4 1.3 课题提出与研究内容- 7 - HYPERLINK \l _bookmark5 1.4 技术路线- 9 - HYPERLINK \l _bookmark6 2 塔架的静力设计方法研究- 10 - HYPERLINK \l _bookmark7 2.1 塔架概念设计 - 10 - HYPERLINK \l _bookmark8 2.1.1 塔架高度确定 - 10 - HYPERLINK \l _bookmark9 2.1.2 塔架选型- 11 - HYPERLINK \l _bookmark10 2.1.3 塔架顶部宽度确定 - 14 - HYPERLINK \l _bookmark11 2.1.4 塔架底部宽度确定 - 15 - HYPERLINK \l _bookmark12 2.1.5 腹杆与塔柱夹角及分层高度- 16 - HYPERLINK \l _bookmark13 2.1.6 塔架材料及构件截面- 17 - HYPERLINK \l _bookmark14 2.2 杆件截面设计 - 17 - HYPERLINK \l _bookmark15 2.2.1 塔架计算简图 - 18 - HYPERLINK \l _bookmark16 2.2.2 塔架荷载计算及组合- 19 - HYPERLINK \l _bookmark17 2.2.3 塔架的内力计算及截面设计- 22 - HYPERLINK \l _bookmark18 2.3 塔架结构验算 - 27 - HYPERLINK \l _bookmark19 2.3.1 塔架强度验算 - 27 - HYPERLINK \l _bookmark20 2.3.2 塔架刚度验算 - 29 - HYPERLINK \l _bookmark21 2.3.3 塔架的稳定性验算 - 33 - HYPERLINK \l _bookmark22 2.4 本章小结- 36 - HYPERLINK \l _bookmark23 3 塔架结构设计参数研究 - 37 - HYPERLINK \l _bookmark24 3.1 塔架有限元模型建立- 37 - HYPERLINK \l _bookmark25 3.1.1 材料本构模型 - 37 - HYPERLINK \l _bookmark26 3.1.2 模型简化及边界条件- 38 - HYPERLINK \l _bookmark27 3.1.3 单元类型与网格划分- 39 - HYPERLINK \l _bookmark28 3.