某某公司产确认规格书.docVIP

产 品 规 格 书 SPECIFICATION FOR APPROVAL 产品型号 GIE0118B 版本 A 产品结构 5” G+G 产品类型 电容式触摸屏 制作人（Prepared by） 设计部审核 （Checked by） 品管部审核 （Checked by） 总经办批准 （Approved by） 请客户仔细阅读规格书中的各项内容，当对规格书内各项内容表示认可时；请在下面客户确认项中签字（此规格书为一式两份）。 Please read the following carefully the contents of the customer, the customer said after the signing of the cover on the confirmation of the customer to acknowledge the contents. 客户确认 确认人 (Confirmed by) 设计部审核 (Checked by) 品管部审核 (Checked by) 批准 (Approved by) 变更记录表 序号 版本号 修改人 修改内容概要 批准 生效日期 1 A 陈小艳 初次发行 2 3 4 5 目 录 1 工程图 Engineering Drawing ······················································ 2 产品结构 Construction································································· 3 机械特性 Mechanical Characteristics········································· 4 电气特性 Electrical Characteristics············································· 5 光学特性 Optical Characteristics················································· 6 使用环境 Processing Environment·············································· 7 引脚定义 PIN Assignment·························································· 8 驱动IC Controller IC································································· 9 机械测试 Mechanical Test·························································· 10 寿命测试 Life Test······································································ 11 环境测试 Environment Test························································· 12 检验标准 Inspection Standard······················································ 13 包装及运输 PackageTransport·················································· 14 注意事项 Attention····································································· 15 质量保证 Guarantee························································· 1 工程图 Engineering Drawing 2产品结构 Construction 结构 Construction 所用材料 Materials Used 注释 Comment 镜片 COVER LENS 玻璃 GLASS 厚度：0.70mm Thickness：0.70mm 透明胶 OCA 粘胶 Adhesive 厚度：0.175 m