急倾斜煤层开采方案模拟与岩层运移分析.pdf

33 4 Vol.33 No.4 2016 07 Journal of Mining Safety Engineering July 2016 1673-3363-(2016)04-0618-061 1 1 1,2 3 (1 123000 2 116028 3 123000) PFC3D 87° 11 240 m 40 m 30 m 30 m 40 m TD 823 A DOI 10.13545/ki.jmse.2016.04.008 Mining plan simulation and rock migration analysis in steep seam mining 1 1 1,2 3 HAN Guang QI Qingjie CUI Tiejun WANG Laigui (1College of Safety Science and EngineeringKey Laboratory of Mine Thermodynamic Disasters and Control of Ministry of EducationLiaoning Technical UniversityFuxinLiaoning 123000China 2Tunnel Underground Structure Engineering Center of LiaoningDalian Jiaotong UniversityDalianLiaoning 116028China 3School of Mechanics and EngineeringLiaoning Technical UniversityFuxinLiaoning 123000China) Abstract In order to understand the influence of steep seam mining on the surrounding rock mass in 3D complex structure, the mining process has been simulated based on PFC of particle flow. The coal seams are in synclinal left with horizontal fracture, and coal seam dip angle is 87°. Simulation scheme has been divided into 11 cycles, and the simulated mining depth is 240 m. This paper has analyzed the damage characteristics of rock mass in the excavation process, and put forward some possible measures. Simulation results have shown that the right side of rock mass of 40 m wide mined-out area is the most stable area. The left side of the rock mass dumps to the left before bending to the right. The left