Pulse Induction Metal Detector脉冲感应金属探测器.pdfVIP

Pulse Induction Metal Detector MEGAPULSE III Introduction Megapulse III is a new generation of pulse induction metal detecting instruments. The pulse induction system is developed to automatically retune, so that changes in the ground mineralization and unwanted metal targets are eliminated.The unit works at great depths and ranges by smooth and stable operation from the control unit in automatic motion mode. How does MegapulseIII work? The search coil sends out short magnetic pulses and produces a strong magnetic field above the ground. The magnetic field induces eddy currents in the metal objects to be detected. These currents generate a secondary electromagnetic field, which flows outward from the target. A portion of this secondary field passes through the antenna winding. This signal is processed by the electronics and displayed by a ticking rate, meter response. The timely decoupling between the transmitting and receiving phases allows the MegapulseIII to work with an increased transmitting and receiving power. MegapulseIII controls Control unit 1 Dela Control a. Sets the Delay timing for various soil conditions. 2 Sensitivity Control a. Sets the Sensitivit for the coil. 3 Interference Control a. The ability to tune out background interference caused b electrical lines in the area. 4 Threshold Control a. Used to ground balance the detector. 5 Mode Selector a. Ability to select between “Auto/Semiauto” 6 Reset Button a. Used to reset the threshold and re-balance instrument after changes are made. 7 Signal Intensity Meter a. Indicates the intensity of the received signal. - 1 - DELAY-This knob changes delay in pulse induction signal. Far left position is for Beaches or Very light soil