LTE-Frame,subframe.timeslot英文版本.ppt

LTE RE(resource element) :The smallest unit of uplink and downlink transmission LTE RB(resource block):In A slot ,physical resources which is continuous bandwidth for 180KHZ in the frequency domain is called a resource block. LTE RS(DL RS , SRS, DMRS) RS(reference signal):pilot signal,in the telecommunications network for the purpose of measuring or monitoring .This signal is usually a single frequency downlink RS(DL RS): 1. measure Downlink channel quality 2. estimate Downlink channel for coherent detection and demodulation of UE terminal The Reference Signal of Antenna Port Uplink reference signal (UL-RS) 1.estimate uplink channel for coherent detection and demodulation of the eNode B-side; 2. measure uplink channel two kinds of uplink RS Demodulation reference signal (DMRS):Estimate the quality of channel which is used by UE, demodulate date Sounding Reserence Signal (SRS):SRS is a broadband RS, the SRS of multiple user can use distribute FDM to multiplex them together The difference between SRS and DMRS sounding reference signal(SRS) is not associated with the PUSCH or PUCCH. demodulation reference signal (DM RS)associated with the PUSCH or PUCCH;, Schematic of use of uplink resource LTE Uplink Channels LTE Uplink Logical Channels * LTE Air Interface ----Frame, Signal and Channel Introduction of LTE Long Term Evolution (LTE) is a 4G wireless broadband technology developed by Third Generation Partnership Project (3GPR), an industry trade group which represents the next step (4G) in a progression from?GSM, a 2G standard, to?UMTS, the 3G technologies based on GSM. Physical layer requirements for LTE E-UTRA Key Air Interface Technology In the downlink, Orthogonal Frequency Division Multiplex Access (OFDMA) is selected as the air-interface for LTE In the uplink, Single-Carrier Frequency Division Multiple Access(SC-FDMA) is selected to efficiently meet E-UTRA performance requirements. CYCLIC PREFIX Because the data rate becomes larger, the data symbol p