Analysis and Optimization on the Explosive ImpactResponse of Bolt Joint Structure英文版本.pdf

Analysis and Optimization on the Explosive Impact Response of Bolt Joint Structure Jing JIN Xinyue WU Mechanical Engineering Department Mechanical Engineering Department Naval Univ. of Engineering Naval Univ. of Engineering Wuhan, China Wuhan, China E-mail: naughtjj@ Abstract—The blast load response of precise bolt Finite Element The paper added pre-stress and simulated interaction of bolt model was studied by LS-DYNA software. Firstly, the initial and part by contact algorithm based on three-dimensional FE stress of thread was added by the dropping temperature method. model. Based on calculating results, the impact response of Then the dynamic response and deformation damage of the bolt different joint was compared and simple damage model was model were calculated by the elastic-plastic constitutive material created. At last, the anti-impact methods of different bolt joint equation and surface-surface contact algorithm, which were put forward. calculating models including bolt joint and bolt-nut joint with and without initial stress. The concerned position was found and a simple damage model of the thread joint was created based on II. THEORETIC ANALYSIS OF SOLVING METHOD the calculated results. Finally optimization schemes for the bolt joint to resist impact were put forward after analyzing the results. A. Explosive Shockwave Transmission These schemes provided important instructions for the str