2MW DDPMSG英文版本.pdf

An Engineering Design of a 2MW Direct-drive Permanent-magnet Wind-power Generation System 1 2 2 1 1 Shoudao Huang , Xin Long , Luoqiang Cai , Keyuan Huang and Jian Gao 1College of Electrical Information Engineering, Hunan University, Changsha, China, 410082 2 Xiangtan Electrical Machine Ltd. Co., Xiangtan, China, 413200 Shoudaohuang@, kyhuang@163.com Abstract–With rapid development of the power semiconductor the PM synchronous generator (PMSG) is a favorite choice in devices, direct-drive permanent magnet synchronous generator MV class wind power generation system nowadays. (PMSG) has shown the significant advantages for its high In order to send the energy to grid from the generator, a full efficiency, reliability, and becomes an attractive choice for power transformation is needed. Limited by the capacity of variable-speed wind power generation. MW class PMSG system semiconductors, such large power cannot deliver to grid with larger capacity, higher power density is an important trend. through only one power converter. Parallel connecting This paper describes the engineering design of the domestic first technique is used to enlarge the deliver capacity of the 2MW direct-drive PMSG system, including optimal machine semiconductors. In this paper, two back-to-back PWM design, converter topology choosing and its control