高层建筑混凝土结构转换层施工技术研究-结构工程专业论文.docxVIP

里鏖盔堂堡圭堂垒燕苎 里鏖盔堂堡圭堂垒燕苎 墨奎塑翼 ABSTRACT The rapid surge ofhigh-rise building challenge the technology ofconstruction,and also the form of high-rise building structure becomes more and more larger and complicated．As the change offunction oftransfer floor，醢gh-rise building transfer floor is an important measure for conveying the up*structure load．But with the increase of load the size oftransfer floor is always great,SO the new issues are bringing about．The research on construction technology for hi蠹一rise building transfer floor is greatly significant in projects domain． The dissertation mainly has a research Oil beam shape of concrete transfer floor The load form of transfer floor is complicated and the stress—swain changes g弓氆tl熟SO the structure design could be divided into the calculations of rectangular sections in bending,incline plane in shearing,and shear wall structure。Because transfer floor is an important part in high-rise building,it needs special requests ofdesign and structure． The beam shape of concrete transfer floor is completely studied．Firstly,for the system of moulding board and support frame in construction the side pressure and screws are analyzed．The material and structure form of support frame are discussed． The design of support frda-rle uses the method of limited state,and also it analyses the integer stability,part stability,and single stability,and then proposes the load analysis of multi-level support frame．To the high-rise buildings support frame，the dissertation proposes the approximate calculation based on half-rigidity steel frame． Secondly,Because of mass concrete structure for high-rise building transfer floor, the emphases is the control of cracks in construction。Based on that,the reason for producing cracks and the calculation must be analyzed．Especially the dissertation expounds the contract cracks in out restriction．In mea辍珊s on the control