热连轧e1立流辊轧机主传动系统三维建模及力学特性分析毕业设计论文.docVIP

仅供参考仅供参考，支持原创，鄙视抄袭！ ，支持原仅供参考，支持原创，鄙视抄袭！ 创，鄙视抄袭！ 毕 业 设 计 设计题目：热连轧E1立辊轧机主传动系统三维建模及力学特性分析 机电工程系 机电工程系 系 别：_________________________ 班 级：_________________________ 姓 名：_________________________ 指 导 教 师：_________________________ 0000年6月 热连轧E1立辊轧机主传动系统三维建模及力学特性分析 摘要 轧机是轧制生产线上的重要单体设备，而轧机主传动系统又是轧机的核心组成部分。随着社会对轧制产品数量需求的增大和对产品质量要求的提高，轧制设备向大型化、高速化、自动化、精密化方向发展的趋势越来越明显。对轧机主传动系统的承载能力、动态稳定性的要求也越来越高。由于轧制现场工作环境的限制，对轧机主传动系统组成零件的应力应变测试平时无法进行。要获取这些信息，掌握轧机主传动系统工作状况，通过有限元分析方法就可实现了。 本文以E1轧机主传动系统为研究对象，利用Pro/E三维软件为主传动系统机械部分各组成零件建立三维模型，并装配。利用大型通用有限元分析软件ANSYS对主传动系统进行单体模态分析、装配体模态分析、单体静力分析，在此基础上得出主传动系统的固有频率、振型以及受力、变形情况。并利用ANSYS对关键部位零件进行优化设计。 关键词：热连轧 立辊轧机 主传动系统 有限元 模态 静力 优化 3D Modeling of E1 Hot Rolling Main Drive System Mill and Mechanical Cha Abstract Rolling mill is an important monomer production line equipment, and rolling mill main drive system is a core component. With the communitys demand for rolled products increased the number and improve the product quality requirements, rolling equipment to large-scale, high-speed, automatic, precise direction of trends are becoming evident. On the carrying capacity of rolling mill drive system, dynamic stability requirements are also increasing. As the rolling work of environmental constraints, on the rolling mill main drive of the stress-strain tests usually can not. To obtain this information, Rolling Mill work to master the situation, through the finite element method can be realized. In this paper, E1 rolling mill main drive for the study, use of Pro / E 3D software-based transmission system to establish three-dimensional model. In this paper, E1 rolling mill main drive for the study, use of Pro / E 3D software-based transmission system to establish three-dimensional model. Using large-scale finite element analysis software ANSYS modal analysis of the transmission system, static analysis, obtained on this basis the natural frequency of transmission. Optimized using ANSYS key component parts. Key words:hot strip;e