格兰富TP单级管道泵.pdfVIP

GB: EC declaration of conformity CN: EC We, Grundfos, declare under our sole responsibility that the products TP and TPD, to which this declaration relates, are in conformity with these Council directives on the approximation of the laws of the EC member states: – Machinery Directive (2006/42/EC). Standards used: EN 809:1998 and EN 60204-1:2006. – Ecodesign Directive (2009/125/EC). Electric motors: – Commission Regulation No 640/2009. Applies only to three-phase Grundfos motors marked IE2 or IE3. See motor nameplate. Standard used: EN 60034-30:2009. – Ecodesign Directive (2009/125/EC). Water pumps: Commission Regulation No 547/2012. Applies only to water pumps marked with the minimum efficiency index MEI. See pump nameplate. – – ATEX Directive (94/9/EC) (applies only to products with the ATEX mark on the nameplate). Standards used: EN 13463-1:2001 and EN 13463-5:2003. , (Declaration of conformity and installation and operating instructions of the motor are enclosed.) This EC declaration of conformity is only valid when published as part of the Grundfos installation and operating instructions (publication number 1212).